Steampure Water Distiller – Stainless
MEMBER PRICE $534.00!
Members Save: $150.00 (21.93%)
- Stainless Steel Water Distiller ( Made in the USA ) – $589.- Value!
- Four Activated Charcoal Filters ( change once every three months ) – $50.- Value!
- Two 1 Gallon Glass Containers with Bis-phenol-A Free Lids – $40.- Value!
- 1 Year Warranty on Electrical Components and 5 year Warranty on Stainless Steel Components.
- FREE SHIPPING – $30.- Value!
- By being an Earther Member You Save $150.-! BEST DEAL ON THE INTERNET! 🙂
Free shipping ONLY to the 48 Contiguous States in United States.
For international shipments, Hawaii, & Alaska contact us directly at for a shipping quote.
Height: 13 inches. (33 cm)
Width: 9.5 inches. (24 cm)
Depth: 11 inches. (28 cm)
Distilling Capacity: 1 gal per 4 hrs
Container Capacity: 1 gallon glass jar
Stainless Steel – The SteamPure distiller is Made in the U.S.A. by Pure Water Inc. Water Distiller Systems
Total Distiller Watts = 700
What is distilled water?
Distilled water is water that has been heated to the boiling point so that impurities are separated from the water, which itself becomes vapor or steam. Steam is then condensed back into pure liquid form. The impurities remain as residue and are removed. STEAMPURE Distillation Systems remove waterborne biological contaminants such as bacteria, viruses, organic and inorganic chemicals, heavy metals, volatile gases, cysts and other contaminants. Distilled water contains virtually no solids, minerals or trace elements. It is clean, natural and healthy. Steam distilled water is the standard by which all other waters are measured.
Why use distillation?
Distillation is the single most effective method of water purification and can be used throughout the world on all types of incoming water. Unlike other treatment methods such as carbon filters and reverse osmosis, our systems are effective on virtually all contaminants and are not dependent on water pressure, water temperature, pH, or chlorine and can even be used on water containing bacteria and parasites and still produce safe, 99.9% pure water.
What maintenance is required?
The units are designed for little maintenance in normal situations. Once per week the boiling tank should be drained to dispose of the contaminants which have been removed from your drinking water (the automatic drain units do this automatically). The boiling tank should be cleaned once per month, although this may vary depending on water conditions in your area. Each unit also incorporates an activated carbon post-filter which requires changing every three months. (Less than 4 USD a month)
Are distillation systems expensive to operate?
Distillation systems use about 3 kWh of electricity for each gallon of water that is distilled. The national average cost of electricity per kWh in the US is 6¢ which means each gallon of distilled water costs about 18¢, a fraction of the cost of buying bottled water! You can find your personal cost per gallon by multiplying 3 times the kWh rate in your area.
Does distilled water leach minerals from my body?
Absolutely, not…in fact just the opposite has been found to occur in cellular research studies. It is a mistaken belief that drinking pure distilled water reduces valuable minerals from living human tissues.
There are two types of minerals, organic and inorganic. Human physiology has a biological affinity for organic minerals. Most organic minerals for our body functions come from dietary plant foods. A growing plant converts the inorganic minerals from the soils to a useful organic mineral.
Tap water presents a variety of inorganic minerals which our body has difficulty absorbing. Their presence is suspect in a wide array of degenerative diseases, such as hardening of the arteries, arthritis, kidney stones, gall stones, glaucoma, cataracts, hearing loss, emphysema, diabetes, and obesity. What minerals are available, especially in “hard” tap water, are poorly absorbed, or rejected by cellular tissue sites, and, if not evacuated, their presence may cause arterial obstruction, and internal damage Even if the human tissue suddenly developed the ability to absorb inorganic minerals from tap water, it would take an enormous amount of tap water to supply the bare minimal mineral quantities for human life functions. If (for example) the rich inorganic mineral content of the tap water in Reno, Nevada were modified so that it would convert the daily Calcium requirement (RDA) from its inorganic calcium solutes, you would have to drink 7.4 gallons of their tap water!
NO PLUMBING REQUIRED!
Q: What is it that looks like rust on inner seams of boiling chamber, soldering spots and in the chamber?
A: What you are seeing is the fusion zone from welding. These are only formed where the metal is welded together. It is not rust, just de-colorization.